Epoxy Flooring Questions, Answered

A professionally installed epoxy or polyaspartic floor system from Rocket City Epoxy Floors typically lasts 15–20+ years in residential garages and 10–15 years in heavy commercial environments. Longevity depends on the system thickness, surface prep quality and traffic. Our multi-coat systems with proper concrete grinding far outlast big-box DIY kits, which usually fail within 1–3 years in Huntsville's humid climate.

Most residential garage epoxy projects in Huntsville range from $5–$12 per square foot depending on the system: standard flake epoxy, premium polyaspartic, or designer metallic. A typical 2-car garage runs $1,800–$3,500 fully installed. We provide free, transparent on-site estimates with no high-pressure sales.

Pure epoxy can be slick when wet, which is why we broadcast a non-slip aggregate or polymer flake into the topcoat on every Huntsville installation. The result is a textured, slip-resistant surface that still cleans easily with a mop.

Most residential garage installations are completed in 1–2 days. You can typically walk on the floor after 24 hours and park vehicles after 72 hours. Commercial projects are scheduled to minimize downtime, often performed nights or weekends.

Yes — older concrete is one of our specialties. We diamond-grind the surface to open the pores, repair cracks and spalling with polymer fillers, then apply a moisture-tolerant primer. This is critical in Huntsville, where vapor transmission from the soil can cause cheaper coatings to peel.

Yes — every Rocket City Epoxy Floors residential installation includes a 15-year written warranty against peeling, delamination and hot-tire pickup. Commercial systems carry warranties tailored to the specified system.

Epoxy is a thicker, body-building basecoat. Polyaspartic is a UV-stable, fast-curing topcoat that won’t yellow in sunlight and cures in hours instead of days. Our standard system uses both — epoxy for build, polyaspartic for protection.

Sometimes. We can recoat over a sound, well-bonded existing system after grinding and bonding-primer application. If the existing coating is failing, the most reliable approach is full removal and re-prep, which we also handle.

Yes. We use moisture-tolerant primers and breathable systems specifically designed for basements and slabs in contact with the ground.

Just clear the space. We handle all grinding, dust containment (HEPA vacuums), prep, repairs and cleanup. You'll have a clean, finished floor when we leave.